28 19/03/2019
Modular hydraulic motors MS11 - MSE11 POCLAIN HYDRAULICS
Drum brake (315 x 80)
Diameter of brake pads : Ø 315 [12.4 dia.]
Width of friction surface : 80 [3.15]
Control
The drum brakes can be controlled hydraulically (service brake) and by a cable (mechanical control for parking brake).
The max. braking torque can only be obtained when the brake
has been run in. Consult your Poclain Hydraulics application
engineer.
Do not use hydraulic and mechanical brake controls
simultaneously.
Brake release pressure vented.
When making an encoding request, you must indicate the following information:
- The material of the brake linings,
- The type of connection at the end of the parking brake control cable,
- Fill out the technical questionnaire for validation of the brake.
M 11
1
P3
S
1
C
12
D
312
F
3
12
P
34
12
S
3456
S 11EM
1
Q3
7 200 N.m [5 310 lb.ft]
71 bar [1 023 PSI]
12 000 N.m [8 851 lb.ft]
120 bar [1 740 PSI]
P
Q
5,38 cm³ [0,33 cu.in] 5,38 cm³ [0,33 cu.in]
12 000 N.m [8 851 lb.ft]
3 800 N [854 lbf]
63,5 N [14,3 lbf]
A
10,5 mm [0,41 '']
B
12 mm [0,47 '']
A
12,5 mm [0,49 '']
B
14,5 mm [0,57 '']
315 x 80
BERAL 1518
M14 x 1.5
DIN 74234
M10 x 1
DIN 74234
End view
of shaft
Cable
Stroke required to bring pads into contact
Max. stroke before automatic brake adjustment
Automatic
Yes
Yes
Yes
No
Brake pads
Asbestos free material
Compensation for wear
Hydraulically controlled dynamic braking
Max. permissible continuous brake torque
Pressure to obtain max. permissible continuous brake torque
Max. permissible brake torque
Pressure to obtain max. permissible brake torque
Brake cylinder filler hole
Size
Standard
Fluid
Mineral
DOT 3/DOT4/SAE J1703
Max. volume required to bring pads into contact
Mechanically controlled parking brake
Max. braking torque
Max permissible force on the cable
Force required to bring pads into contact